Documenting Concrete Crack and Defect Patterns
Map crack orientation and relation to supports or joints. Use the example below to practice the review and record an output that another reviewer can reproduce.

Inputs and Prerequisites
Scaled photographs, fixed stations, dated survey and an exposure record.
Review Workflow
- Crack map
- Measure width
- Repeat visit
- Interpret
- Map crack orientation and relation to supports or joints.
- Record width using a consistent measurement technique.
- Compare repeated measurements under similar conditions.
Worked Example
At one marked station an illustrative width changes from 0.20 mm to 0.30 mm. The observed change is 0.10 mm. If the instrument is repeatable only to about 0.10 mm, repeat before concluding that the crack is widening.
Output Checks and Common Errors
Record instrument resolution, temperature and surface condition with every reading.
Official References
- ACI concrete repair resources
Identify applicable resources for investigation and repair of existing concrete.