Advanced

Floor Vibration and Serviceability

Review whether a floor model represents the participating mass, stiffness and excitation relevant to serviceability.

Inputs and Prerequisites

Framing and slab geometry; mass sources; occupancy and excitation; boundary and damping assumptions.

Work Steps

  1. Inputs
  2. Model or detail
  3. Independent check
  4. Review record
  1. Identify the bay or mode most likely to participate.
  2. Document the mass, stiffness, supports and damping used.
  3. Select a response measure and acceptance criterion appropriate to the occupancy.

Worked Example or Review Exercise

Compare two conceptual floors with identical mass and different stiffness. A fourfold rise in stiffness doubles the natural frequency of a single-degree-of-freedom idealization. Use a full response check for the actual floor.

Output Checks and Common Errors

Check mode shapes and compare model and hand-estimated frequency ranges. Avoid inferring acceptance from frequency alone.

Official References