Steel Bar Grating and Walkway Supports
Use the bearing-bar direction, panel span and load type to identify an appropriate grating table.
Inputs and Prerequisites
Panel geometry; supports, bearing and fastening; specified uniform and concentrated loads.
Work Steps
- Inputs
- Model or detail
- Independent check
- Review record
- Identify bearing-bar orientation on the layout.
- Match material, span and bar spacing to the product data.
- Review concentrated loads and openings separately from the uniform-load case.
Worked Example or Review Exercise
On a layout with supports 1.0 m apart, draw the bearing bars spanning between those supports. A panel rotated by 90 degrees requires a fresh span and support check.
Output Checks and Common Errors
Compare actual clear span and bearing with the table assumptions. Confirm attachment and access around cutouts.
Official References
- NAAMM Metal Bar Grating Manual
Use the publisher’s source to verify the scope, assumptions and applicable edition.