Modal Response and Structural Model Verification
Check the mass source, restraining conditions and mode shapes before interpreting modal results.
Inputs and Prerequisites
Analytical model; mass assignments; support restraints; applicable analysis settings.
Work Steps
- Inputs
- Model or detail
- Independent check
- Review record
- Review mass units and where mass is assigned.
- Run a small baseline case before the full model.
- Inspect modes, participation and any unexpected rigid-body movement.
Worked Example or Review Exercise
A spring-mass baseline with four times the mass and unchanged stiffness has half the natural frequency. Compare that direction of change with a controlled software test.
Output Checks and Common Errors
Compare mass totals with the load takeoff. A very low mode may indicate a modeling mechanism or missing restraint.
Official References
- CSI analysis reference documentation
Use the publisher’s source to verify the scope, assumptions and applicable edition.
Related Calculation Workbooks
- Lateral Deflection Envelope Example
A simplified lateral deflection and torsion worksheet with braced-frame stiffness inputs.