Precast Concrete Connections and Erection
Trace the transfer of loads during handling, erection and the final condition.
Inputs and Prerequisites
Element and connection drawings; lifting, bearing and bracing information; erection sequence.
Work Steps
- Inputs
- Model or detail
- Independent check
- Review record
- List the support and restraint conditions at each stage.
- Trace reactions into the bearing and connection details.
- Check temporary stability separately from the completed load path.
Worked Example or Review Exercise
For a centered hypothetical 24 kN panel seated on two equally stiff bearings, 12 kN per bearing is a first equilibrium check. Verify the real support geometry and staged restraints.
Output Checks and Common Errors
Compare erection and design drawings for changes in restraint or bearing. Escalate changes to lifting points or temporary bracing.
Official References
- PCI design guides and manuals
Use the publisher’s source to verify the scope, assumptions and applicable edition.
Related Calculation Workbooks
- Reinforced Concrete Beam Ledge
An SI workbook example that organizes ledge reinforcement, punching shear and bearing checks.
- Reinforced Concrete Bracket and Corbel
An SI workbook example covering reinforcement and bearing for a concrete bracket or corbel.
- Concrete Corbel Design and Detailing
Organizes concrete corbel forces, geometry, reinforcement and bearing plate information.
- Archived Concrete Corbel Workbook
An archived corbel workbook. Its worksheet content could not be opened.