Prestressed Concrete Load Stages and Service Checks
Organize transfer and service checks for a prestressed member.
Inputs and Prerequisites
Member geometry and section properties; prestress force and profile; concrete strength, loads and loss assumptions by stage.
Work Steps
- Inputs
- Model or detail
- Independent check
- Review record
- List the transfer, handling and service conditions.
- Record the force and eccentricity at each section and state.
- Compare the effects of prestress and gravity loading for the applicable stage.
Worked Example or Review Exercise
A 200 kN axial force acting 50 mm from the centroid gives a 10 kN·m moment component. Establish its sign and stage before combining effects.
Output Checks and Common Errors
Confirm use of the correct section and force after losses. Distinguish camber and service deflection from strength verification.
Official References
- PCI design guides and manuals
Use the publisher’s source to verify the scope, assumptions and applicable edition.
Related Calculation Workbooks
- Composite Section Moment–Curvature
Provides a section setup and material models for concrete, reinforcement and prestress.
- Concrete Section and Material Variables
Pairs a concrete section setup with a material-variable worksheet for concrete, rebar and prestress.
- Post-Tensioned Concrete Analysis and Design (BS 8110 RCC42)
Separates material data, typical calculations, detailing and deflection for a post-tensioned member.