Intermediate

Reviewing a Steel Coating Inspection Record

Confirm preparation and coat sequence before reviewing thickness readings. Use the example below to practice the review and record an output that another reviewer can reproduce.

Inputs and Prerequisites

Coating system, specification, calibrated thickness gauge and station map.

Review Workflow

  1. Surface condition
  2. Coat sequence
  3. Readings
  4. Acceptance record
  1. Confirm preparation and coat sequence before reviewing thickness readings.
  2. Compare both individual entries and the prescribed grouping method.
  3. Record any recheck or repair locations on the drawing.

Worked Example

Five illustrative dry-film readings are 82, 95, 101, 106 and 116 µm. Their mean is 100 µm. The 82 µm reading stays visible in the record because acceptance may include local limits as well as averages.

Output Checks and Common Errors

Do not infer acceptance from the mean alone. Apply the project method, product requirements and gauge corrections.

Official References