Retaining Wall Load Path and Foundation Checks
Connect earth and water assumptions to wall and foundation checks.
Inputs and Prerequisites
Wall geometry; geotechnical recommendations; backfill, groundwater and surcharge assumptions.
Work Steps
- Inputs
- Model or detail
- Independent check
- Review record
- Record soil, water and surcharge conditions with their sources.
- Resolve the loads and their application levels.
- Review the wall section, base and supporting soil as one load path.
Worked Example or Review Exercise
For an assumed triangular lateral pressure diagram, the resultant acts one-third of the loaded height above its base. Verify the chosen pressure diagram against the applicable geotechnical basis.
Output Checks and Common Errors
Confirm drainage assumptions and check forces at the base before evaluating stability or resistance.
Official References
- NRC National Building Code of Canada 2020
Use the publisher’s source to verify the scope, assumptions and applicable edition.
Related Calculation Workbooks
- Retaining Wall Stability Checks
Two populated worksheets that organize soil pressures and wall stability checks.
- Seismic Retaining Wall Design
Separates soil capacity, seismic soil actions and concrete checks for a retaining wall.
- Integral Abutment and Pile Cap
A bridge abutment workbook covering staged loads, pile cap, backwalls, wingwall and approach slab.
- Concrete Basement Wall (BS 8110 RCC61)
Separates basement wall input, stability, concrete design and crack-width checks.
- Concrete Retaining Wall (BS 8110 RCC62)
Groups retaining wall input, stability and reinforced concrete design in distinct tabs.