Checking Connectivity in a Revit Analytical Model
Compare analytical endpoints at intended joints. Use the example below to practice the review and record an output that another reviewer can reproduce.
Inputs and Prerequisites
A small physical model, analytical elements and published model tolerance assumptions.
Review Workflow
- Physical framing
- Analytical endpoints
- Connectivity check
- Model handoff
- Compare analytical endpoints at intended joints.
- Check position and role of columns, beams and restraints.
- Record intentional offsets separately from unintended disconnected nodes.
Worked Example
An assumed beam endpoint is at elevation 3.000 m, and the target analytical node is at 3.020 m. The 20 mm mismatch must be resolved or modeled as an intentional offset. A physical solid overlap does not prove analytical connectivity.
Output Checks and Common Errors
Confirm identical coordinates or an explicit modeled link before checking load transfer.
Official References
- Autodesk structural engineering learning collection
Find publisher exercises on analytical model setup and connectivity.