Steel Deck Span, Deflection and Diaphragm Design
A steel deck profile can serve different structural functions at different stages. Record the span and loading condition for each gravity check and draw the in-plane load path separately.
Inputs and Prerequisites
A deck layout and section, clear spans and support conditions, construction and in-service loads, and the current manufacturer’s load tables.
Reading Steel Deck Span and Load Information
- Gravity load
- Deck strip
- Supporting members
- Vertical reactions
- Match the actual deck profile, thickness, span configuration and support conditions to the manufacturer’s data.
- Identify whether the check is for construction-stage deck or the completed assembly. Record temporary loads and shoring assumptions separately.
- For diaphragm action, trace force from the deck and attachments into collectors and vertical resisting elements.
Worked Example for a One-Metre Deck Strip
For a hypothetical 1 m strip over a 3 m simple span with a uniform vertical load of 2.4 kPa, the line load is 2.4 kN/m. Each support receives 3.6 kN per metre of deck width, and the idealized maximum bending moment is 2.7 kN·m per metre. Use these values to check the model inputs and reactions. The relevant product table depends on the stage, spans, connection condition and stated rating basis.
Output Checks and Common Errors
Review gravity deflection for the appropriate stage. Check diaphragm shear transfer and attachments using the separate lateral load path and the provisions applicable to the project.
Official References
- Canam steel deck product and design resources
Locate the relevant deck profile and its technical documents.
- NIST guide to composite steel deck and concrete-filled diaphragms
Review how an example traces in-plane forces through the diaphragm and its connections.