Reading Shear Plate Connection Load Paths
Draw a free-body diagram from beam web through bolts and plate to the support. Use the example below to practice the review and record an output that another reviewer can reproduce.
Inputs and Prerequisites
A beam-end reaction, connection sketch, bolt locations and weld layout.
Review Workflow
- Beam web
- Bolts
- Plate and weld
- Support
- Draw a free-body diagram from beam web through bolts and plate to the support.
- Locate the idealized reaction line relative to the weld group.
- List member, bolt, plate and weld checks separately.
Worked Example
A 48 kN vertical reaction applied 60 mm from a chosen reference line adds a 2.88 kN·m moment about that line. Show both actions on the sketch before selecting the connection analysis method.
Output Checks and Common Errors
Keep bolt count, load distribution, eccentricity and design basis explicit. A simple equal-share calculation alone does not establish capacity.
Official References
- Canadian Institute of Steel Construction technical resources
Find steel design, fabrication and connection resources for the application.
Related Calculation Workbooks
- Single-Plate Shear Connection
An AISC 360-16 LRFD check sheet for a bolted single-plate connection.