Comparing Floor Deck Slab Thicknesses
Map topping thickness and rib geometry to each option. Use the example below to practice the review and record an output that another reviewer can reproduce.
Inputs and Prerequisites
Proposed deck series, slab sections and scope of the load table.
Review Workflow
- Slab section
- Thickness delta
- Weight delta
- Table boundary
- Map topping thickness and rib geometry to each option.
- Separate the material quantity comparison from deck capacity.
- Confirm the table is for the same load stage and composite action assumptions.
Worked Example
Two uniform topping options differ by 25 mm above the ribs. At 24 kN/m³ that difference adds 0.60 kPa, or 9 kN over 15 m². The rib volume is unchanged for this comparison.
Output Checks and Common Errors
Keep total depth and topping depth in separate columns. Obtain profile-specific tables for capacity.
Official References
- Steel Deck Institute design manuals
Find the manual for the specified deck application. Use the matching manufacturer tables for product-specific ratings.