Wind Loads and Lateral Load Paths
Trace wind pressures from the envelope through the lateral system.
Inputs and Prerequisites
Building geometry and exposure; pressure zones and directions; adopted code and drawings.
Work Steps
- Inputs
- Model or detail
- Independent check
- Review record
- Define the pressure cases and sign convention.
- Separate envelope component pressures from the main structural system loading.
- Transfer pressures to the model using the appropriate tributary geometry.
Worked Example or Review Exercise
For a hypothetical 12 m² wall panel with a uniform net pressure of 0.8 kPa, the resultant is 9.6 kN. Place it at the centroid for a simple check, then account for real pressure zones separately.
Output Checks and Common Errors
Compare total lateral force and overturning effects with the model reactions. Verify signs and tributary areas.
Official References
- ASCE 7 design loads
Use the publisher’s source to verify the scope, assumptions and applicable edition.
Related Calculation Workbooks
- ASCE 7-10 Wind Loads
A historical workbook with separate main wind-force resisting system and gust-effect sheets.
- NBCC Wind Acceleration Archive
An archived wind acceleration workbook. Its worksheet content could not be opened.
- Wind Acceleration by Simiu–Miyata
Organizes wind acceleration inputs and separates resonant from quasi-static response.
- NBC 2005 Wind Uplift (June Archive)
A historical workbook for main wind actions and cladding pressures for several roof forms.
- NBC 2005 Wind Uplift (November Archive)
A second historical wind workbook covering primary actions and cladding loads by roof configuration.
- Primary Building Wind Loads
Organizes principal building wind inputs and pressures on a single worksheet.
- Wind Pressures on Components and Cladding
Maps area and zone to component and cladding wind coefficients.
- NBC 2010 / OBC 2012 Low-Rise Wind Loading
Includes historical low-rise building wind calculations and component coefficients.